Dầu Shell Corena S4 R

ADVANCED SYNTHETIC ROTARY AIR COMPRESSOR OIL

PREVIOUSLY SHELL CORENA AS

Shell Corena S4 R is an advanced air compressor lubricant using unique additive technology, capable of giving outstanding performance in oil-flooded air compressors of screw or vane design. Based on specially selected PAO base fluids, Shell Corena S4 R provides long oil life and effective lubrication in severe applications.

PERFORMANCE FEATURES

LONG OIL LIFE–MAINTENANCE SAVING

• Shell Corena S4 R will allow for significant increases in oil drain intervals (compared to mineral compressor oil) with oil analysis, where allowed by manufacturers – up to a maximum of 12,000 hours, even when operating at a continuous maximum discharge air temperature in excess of 100°C. Depending on intake air
  quality, duty cycle and ambient conditions, especially in hot and humid type climates as found in the Asian and Pacific regions, a reduced oil drain period is recommended.
• Shell Corena S4 R is formulated to reduce sludge and deposit formation from thermal degradation processes, even at very high temperatures, maintaining compressor efficiency.
• Reduced change of viscosity with change in operating temperature in comparison to conventional mineral oil-
• based products. This provides low starting viscosity together with higher viscosity at operating temperature.

OUTSTANDING RESISTANCE TO OXIDATION

• Shell Corena S4 R is designed to resist the formation of carbon deposits and the formation of sludge in all moving parts of sliding vane and screw compressors, helping to ensure maximum output of the machine throughout the service interval. OUTSTANDING WEAR PROTECTION
• Effectively protects all metal surfaces from corrosion. Protects all sensitive machinery parts (e.g. gears, screws, bearings, from wear to help prolong the service intervals).
  MAINTAINING SYSTEM EFFICIENCY
• Resulting in a low foaming tendency and very good air release and water shedding properties. This helps to separate oil from air and water in two-stage compressor intercoolers, oil/water separators
  and drier units.
• The product is easily separated from water, keeping the system in good condition even when contaminated with water.
• Shell Corena S4 R has low volatility and oil carry over to provide reduced oil top-up requirements in combination with increased air quality.

APPLICATIONS

ROTARY SLIDING VANE AND SCREW AIR COMPRESSORS

Oil flooded/oil-injected single and two-stage compressors, in particular those operating with higher output pressures of up to 25 bar and with air discharge temperatures higher than 100°C (including intermittent operation under these conditions).

EQUIPMENT RUNNING UNDER ARDUOUS CONDITIONS

• May also be used where exceptionally high ambient temperatures are found, when the oil temperature cannot be reduced to normal levels. ABB TURBOCHARGERS
• Recommended for use in ABB turbochargers fitted to low and medium speed diesel engines used in marine and power generation applications.

COMPATIBILITY AND MISCIBILITY MISCIBILITY

• Shell Corena S4 R is fully miscible with mineral oils, although dilution with mineral lubricants will markedly reduce its performance. Care must be taken to ensure that Shell Corena S4 R is not mixed with other types of synthetic fluids.

SEAL COMPATIBILITY

• Shell Corena S4 R is compatible with all sealing materials commonly used in air compressors.

SPECIFICATIONS, APPROVALS AND RECOMMENDATIONS

• ABB for use in VTR turbochargers, with a maximum oil change interval of 5,000 hours (HZTL 90617, List 3). ISO 6743-3A-DAJ.